Drain the tank completely.
Let it dry fully. Water left standing for months causes odour, algae and corrosion.
Products, knowledge and support — everything you need from INDORA.
An air cooler pulls dusty outside air through wet pads, all day, for months. That is a demanding job. Coolers that get basic care regularly outlast neglected ones by years — and most service complaints we receive trace back to skipped cleaning, not a faulty product.
An air cooler pulls dusty outside air through wet pads, all day, for months. That is a demanding job. Coolers that get basic care regularly outlast neglected ones by years — and most service complaints we receive trace back to skipped cleaning, not a faulty product.
Check the water level and refill with clean water.
Look at the pads. If they appear dusty or crusted, they need cleaning.
Wipe the exterior with a dry cloth.
Check that water is flowing evenly over all pads when the pump runs. Uneven flow means partial cooling.
Check the water level and refill with clean water.
Look at the pads. If they appear dusty or crusted, they need cleaning.
Wipe the exterior with a dry cloth.
Check that water is flowing evenly over all pads when the pump runs. Uneven flow means partial cooling.
Switch off and unplug the cooler. Always.
Drain the water tank completely.
Remove the cooling pads and rinse with clean water. Do not scrub hard — pads are designed to be porous, and aggressive scrubbing damages them.
Clean the tank interior to remove sediment and mineral deposits.
Check the pump inlet for blockage. This is the most common cause of “cooler suddenly stopped cooling”.
Refill with clean water and refit the pads correctly.
Switch off and unplug the cooler. Always.
Drain the water tank completely.
Remove the cooling pads and rinse with clean water. Do not scrub hard — pads are designed to be porous, and aggressive scrubbing damages them.
Clean the tank interior to remove sediment and mineral deposits.
Check the pump inlet for blockage. This is the most common cause of “cooler suddenly stopped cooling”.
Refill with clean water and refit the pads correctly.
A little care before storage keeps your cooler fresh, durable and ready for the next season.
Let it dry fully. Water left standing for months causes odour, algae and corrosion.
Dry them completely before refitting or storing.
Remove remaining moisture, dust and residue before storage.
Cover the cooler to keep dust out while it is not in use.
Keep it away from direct sunlight and moisture.
Standing water over the off-season causes more damage than a full season of use.
A little care before storage keeps your cooler fresh, durable and ready for the next season.
Let it dry fully. Water left standing for months causes odour, algae and corrosion.
Dry them completely before refitting or storing.
Remove remaining moisture, dust and residue before storage.
Cover the cooler to keep dust out while it is not in use.
Keep it away from direct sunlight and moisture.
Standing water over the off-season causes more damage than a full season of use.
A quick check before the first use ensures better cooling, safer operation and a longer life for your cooler.
Replace them if they are brittle, discoloured, or clogged with deposits.
Clean the tank before the first fill.
Check the power cord and plug for any visible damage.
Run the pump alone for five minutes to wet the pads before switching on the fan.
Listen for unusual noise from the fan or motor.
CHECK · CLEAN · PREPARE
Complete these five quick checks before switching your cooler on for the season.
A quick check before the first use ensures better cooling, safer operation and a longer life for your cooler.
Replace them if they are brittle, discoloured, or clogged with deposits.
Clean the tank before the first fill.
Check the power cord and plug for any visible damage.
Run the pump alone for five minutes to wet the pads before switching on the fan.
Listen for unusual noise from the fan or motor.
CHECK · CLEAN · PREPARE
Complete these five quick checks before switching your cooler on for the season.